The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither TMSS Holding nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Oct 29, 2024
1
Product data sheet
Characteristics
XMLP400BD21F
Electronic pressure sensors, Pressure sensors
XM, transmitter, XMLP, 400 bar, G1/4 A male,
4...20 mA, M12, set of 1
Main
Range of product Telemecanique Pressure sensors XM
Product or component
type
Electronic pressure sensors
Pressure sensor type Pressure transmitter
Pressure sensor name XMLP
Electrical circuit type Control circuit
Pressure rating 400bar
Local display Without
Controlled fluid Air (-30…135°C)
Fresh water (0…135°C)
Hydraulic oil (-30…135°C)
Gas (-30…135°C)
Refrigeration fluid (-30…135°C)
Fluid connection type G 1/4A (male) conforming to DIN 3852-E
Electrical connection 1 male connector M12 4 pins
[Us] rated supply
voltage
12...24 V DC SELV (voltage limits: 7…33V)
Current consumption < 23 mA
Type of output signal Analogue
Analogue output
function
4...20 mA, 2-wire
Quantity per set Set of 1
Type of packing Individual
Complementary
Pressure setting range 0…400bar
Maximum permissible accidental pressure 1200bar
Destruction pressure 2400bar
Materials in contact with fluid Fluorocarbon FPM
Stainless steel AISI 316L
Operating position Any position
Protection type Reverse polarity
Load short-circuit
Electromagnetic compatibility Electrostatic discharge immunity test conforming to IEC 61000-4-2 8 kV air, 4 kV
contact
1.2/50 µs shock waves immunity test conforming to IEC 61000-4-5 1 kV 42 Ohm
Immunity to magnetic fields conforming to IEC 61000-4-8 100 A/m 50 Hz
Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 4 kV
Susceptibility to electromagnetic fields conforming to IEC 61000-4-3 10 V/m
80...3000 MHz
Radiated RF fields conforming to IEC 61000-4-6 10 V 0.01...80 MHz
[Uimp] rated impulse withstand voltage 0.5kV
Response time on output <= 2 ms 10...90 % of full scale
Measurement accuracy +/- 0.5 % of the measuring range
Resolution 0.1 % of the measuring range
Drift of the sensitivity +/- 0.02 % of measuring range/°K
Drift of the zero point +/- 0.02 % of measuring range/°K
Mechanical durability 10000000cycles
Net weight 0.094kg
Diameter 26mm
Length 38.1mm
2
Environment
Standards IEC 61326-2-3
NSF ANSI 61
Product certifications cULus[RETURN]CE[RETURN]RCM
Protective treatment TC
Ambient air temperature for operation -30…85°C
Ambient air temperature for storage -50…100°C
Vibration resistance 20 gn (f = 15…2000Hz) conforming to IEC 60068-2-6
Shock resistance 100 gn for 11ms conforming to IEC 60068-2-27
IP degree of protection IP65 conforming to IEC 60529
IP67 conforming to IEC 60529
IP69K conforming to IEC 60529
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 4.200cm
Package 1 Width 4.600cm
Package 1 Length 8.800cm
Package 1 Weight 94.000g
Unit Type of Package 2 S01
Number of Units in Package 2 24
Package 2 Height 15cm
Package 2 Width 15cm
Package 2 Length 40cm
Package 2 Weight 2.526kg
Offer Sustainability
Sustainable offer status Green Premium product
Circularity Profile No need of specific recycling operations
California proposition 65 WARNING: This product can expose you to chemicals including: Diisononyl
phthalate (DINP), which is known to the State of California to cause cancer,
and Di-isodecyl phthalate (DIDP), which is known to the State of California
to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
For all Reach Rohs enquiries contact us at sustainability@tesensors.com